wie hier im Forum schon dargestellt betreibe ich Aktivlautsprecher, wobei die Frequenzweiche und Filter bereits an der Quelle, dh als Plugin im Player realisiert sind. Das Plugin heißt Fabfilter ProQ, und ist im Player PureMusic unter MacOS eingebettet. Das Ergebnis hört sich gut an.
Mich interessiert Folgendes:
ProQ bietet EQ die Einstellungen Zero Latency welche Phasenverschiebungen zulässt bzw. prinzipbedingt erzeugt, aber auch Einstellung ohne Phasenverschiebungen dafür mit Latenzen. Bei der phasenstarren Einstellungen gibt es 4 "Qualitätsstufen" die sich durch unterschiedliches Verhalten bei hohen Filtergüten, bzw. bei der Tieftonwiedergabe unterscheiden. Beim Betrieb mit hoher Latenz ist das Verhalten bez. Preringing laut Tutorial auch im Tiefton und bei hohen Filtergüten besser.
Auszug aus dem Handbuch von ProQ:
Es gibt also den Zusammenhang: Null Latenz führt zwangsläufig zu Phasenverschiebungen, Phasenstarrheit zu Preringing? Warum eigentlich?FabFilter hat geschrieben:Zero latency mode is the default. While it introduces phase changes, it is CPU-efficient and doesn't result in any latency, so it is the best mode for e.g. live usage. Also, it's quite possible you might like the coloration introduced by the phase changes when mixing, for example.
Linear Phase - Low Latency provides linear-phase processing with a minimal latency. Use only with low Q settings, or when only changing the mid-high part of the spectrum. With a sample rate of 44.1 kHz, it results in a total latency of 3072 samples (about 70 ms).
Linear Phase - Medium Latency is a good compromise between low-frequency resolution and latency and we recommend to use this in general for linear-phase processing. The total latency is 6144 samples at a sample rate of 44.1 kHz (about 139 ms).
Linear Phase - High Latency gives very good low-frequency resolution. If you need to use high Q settings when changing the low end of the spectrum, use this mode. The total latency is 12288 samples at a sample rate of 44.1 kHz (about 279 ms).
Linear Phase - Maximum Latency results in even better low-frequency resolution at the expense of latency and possible pre-echo problems. The total latency here is 24576 samples at a sample rate of 44.1 kHz (about 557 ms).
Grüße BvK