digigrid ioc
Verfasst: 02.03.2020, 12:25
Moin
Ich habe die Suche nach Audio Interfaces ja noch nicht aufgegeben
Heute ist mir im Netz dieses unter die Maus gekommen:
https://digigrid.net/product/digigridioc/
Wenn ich das richtig verstehe, wird es unter Windows per ASIO und unter OSX als AU Device unterstützt. Des weiteren ist es wohl möglich, andere ASIO Devices ANDERER HERSTELLER mit einzubinden!
Und das zu einem Preis von unter 2000,-! Digigrid ist wohl aune Partnerschaft aus Waves Audio und Digico. Digico ist wiederum der Mercedes unter den digitalen Mischpult Herstellern. Das könnte also ein sehr interessantes Gerät sein.
Viele Grüße
Christian
8x line inputs (25-pin DB25)
8x line outputs (25-pin DB25)
16x AES/EBU I/O (25-pin DB25)
1x ADAT I/O (8 channels @ 48kHz). (4 channels @ 96 kHz and 2 channels @ 192 kHz will be supported in the future)
2x Mic inputs (XLR/TRS combo)
2x SoundGrid RJ45 Ethernet ports
1x Word clock I/O
1x AC input
2x headphone outputs with analog level knobs
1U rack-mounted
Supported sample rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be supported in the future)
Clock Synchronization via Word Clock input, AES/EBU, SoundGrid (SoE), Internal
Reset switch
Multiple broadcast level format settings (jumpers on all analog I/Os)
Inputs
Mic input impedance: 2K5 Ohms
Phantom power: 48V
Line input impedance: 8K0 Ohms
Mic gain range: 0 dB to +52.5 dB in 7.5-dB steps. Fine control provides an additional 0dB to 7dB in 0.5-dB steps
Mic maximum input level: +26dB
Line maximum input level: +36dB
Mic equivalent input noise: >-126dB (150 Ohm source, Gain +59.5dB)
Frequency response: +/-0.5dB 20Hz to 20kHz
Channel separation: Better than 90dB (40Hz to 15kHz)
Outputs
Maximum line output level: +22dBu
Residual line output noise:<90dB (20Hz to 20kHz)
Frequency Response: +/-0.5dB (20Hz to 20kHz)
Line output impedance: 50 Ohms
Channel separation: Better than 90dB (40Hz to 15kHz)
Harmonic Distortion: Typically <0.01% @ unity gain, -10dB input @ 1kHz
Ich habe die Suche nach Audio Interfaces ja noch nicht aufgegeben
Heute ist mir im Netz dieses unter die Maus gekommen:
https://digigrid.net/product/digigridioc/
Wenn ich das richtig verstehe, wird es unter Windows per ASIO und unter OSX als AU Device unterstützt. Des weiteren ist es wohl möglich, andere ASIO Devices ANDERER HERSTELLER mit einzubinden!
Und das zu einem Preis von unter 2000,-! Digigrid ist wohl aune Partnerschaft aus Waves Audio und Digico. Digico ist wiederum der Mercedes unter den digitalen Mischpult Herstellern. Das könnte also ein sehr interessantes Gerät sein.
Viele Grüße
Christian
8x line inputs (25-pin DB25)
8x line outputs (25-pin DB25)
16x AES/EBU I/O (25-pin DB25)
1x ADAT I/O (8 channels @ 48kHz). (4 channels @ 96 kHz and 2 channels @ 192 kHz will be supported in the future)
2x Mic inputs (XLR/TRS combo)
2x SoundGrid RJ45 Ethernet ports
1x Word clock I/O
1x AC input
2x headphone outputs with analog level knobs
1U rack-mounted
Supported sample rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be supported in the future)
Clock Synchronization via Word Clock input, AES/EBU, SoundGrid (SoE), Internal
Reset switch
Multiple broadcast level format settings (jumpers on all analog I/Os)
Inputs
Mic input impedance: 2K5 Ohms
Phantom power: 48V
Line input impedance: 8K0 Ohms
Mic gain range: 0 dB to +52.5 dB in 7.5-dB steps. Fine control provides an additional 0dB to 7dB in 0.5-dB steps
Mic maximum input level: +26dB
Line maximum input level: +36dB
Mic equivalent input noise: >-126dB (150 Ohm source, Gain +59.5dB)
Frequency response: +/-0.5dB 20Hz to 20kHz
Channel separation: Better than 90dB (40Hz to 15kHz)
Outputs
Maximum line output level: +22dBu
Residual line output noise:<90dB (20Hz to 20kHz)
Frequency Response: +/-0.5dB (20Hz to 20kHz)
Line output impedance: 50 Ohms
Channel separation: Better than 90dB (40Hz to 15kHz)
Harmonic Distortion: Typically <0.01% @ unity gain, -10dB input @ 1kHz