wie an anderer Stelle dieses Forums angekündigt, möchte ich auch mal ein bischen mit BruteFir fummeln. Leider hat zwar die Installation geklappt, aber beim starten des Programms mit dem Befehl "brutfir" bekomme ich immer folgende Fehlermeldung
Code: Alles auswählen
BruteFIR v1.0m (November 2013) (c) Anders Torger
Parse error on line 6 in file "/home/stefan/.brutefir_config":
cannot set config_file setting in this file.
Code: Alles auswählen
## DEFAULT GENERAL SETTINGS ##
float_bits: 64; # internal floating point precision
sampling_rate: 48000; # sampling rate in Hz of audio interfaces
filter_length: 4096,16; # length of filters
config_file: "~/brutefir_config"; # standard location of main config file
overflow_warnings: true; # echo warnings to stderr if overflow occurs
show_progress: false; # echo filtering progress to stderr
max_dither_table_size: 0; # maximum size in bytes of precalculated dither
allow_poll_mode: false; # allow use of input poll mode
modules_path: "."; # extra path where to find BruteFIR modules
monitor_rate: false; # monitor sample rate
powersave: false; # pause filtering when input is zero
lock_memory: true; # try to lock memory if realtime prio is set
sdf_length: -1; # subsample filter half length in samples
safety_limit: -0.01; # if non-zero max dB in output before aborting
convolver_config: "~/.brutefir_convolver"; # location of convolver config file
## COEFF DEFAULTS ##
coeff "c-l" {
filename: "/root/brutefir/filter/XO1L48.dbl";
format: "FLOAT64_LE";
};
coeff "c-r" {
filename: "/root/brutefir/filter/XO1R48.dbl";
format: "FLOAT64_LE";
};
## INPUT DEFAULTS ##
input "leftin","rightin" {
device: "alsa" { device: "hw:1"; ignore_xrun: true; }; # module and parameters to get audio
sample: "S16_LE"; # sample format
channels: 2/0,1; # number of open channels / which to use
delay: 0,0; # delay in samples for each channel
maxdelay: -1; # max delay for variable delays
subdelay: 0,0; # subsample delay in 1/100th sample for each channel
mute: false,false; # mute active on startup for each channel
};
## OUTPUT analog
#
output "leftout", "rightout" {
device: "alsa" { device: "hw:1"; ignore_xrun: true; };
sample: "S16_LE";
channels: 2;
dither: false;
};
## FILTER DEFAULTS ##
filter "drc_l" {
from_inputs: "leftin";
to_outputs: "leftout";
coeff: "c-l";
};
filter "drc_r" {
from_inputs: "rightin";
to_outputs: "rightout";
coeff: "c-r";
};
Ich weiß nicht mehr weiter, was das Problem ist. Ehrlich gesagt bin ich mir auch nicht sicher, ob der Rest richtig ist, aber dann wäre doch eine andere Fehlermeldung gekommen. Oder?
Im Übrigen habe ich http://brutefir.sourcearchive.com/docum ... ource.html gefunden. So ziemlich in der Mitte ist ein passender Eintrag, der mir leider nicht weiter hilft...
Meine Frage nun, was ist das Problem bzw. was mache ich falsch. Vielleicht kann mir Jemand hier helfen. Wäre echt klasse
Danke und Gruß
Hank