DAC nur für CD-Anwendung

Antworten
kadu
Aktiver Hörer
Beiträge: 100
Registriert: 13.05.2014, 12:08
Wohnort: bad hall o.ö.

DAC nur für CD-Anwendung

Beitrag von kadu »

hallo zusammen,

ich habe mich nicht mehr mit dem thema beschäftigt,da ich vor jahren auf heimkino umgestiegen bin,da mich das ganze hifi high end total ausgelutscht hat.

ich hatte damals schon einige dac boliden von mark levinson,theta,cello,jadis usw.,nur würde ich es nie wieder wollen mich so sinnlos im kreise zu drehen.

irdgendwie würde es mich nun doch wieder reizen einen dac und einen transport zu kaufen,zum reinen stereo hören.
ich bin nur ziemlich verunsichert :? ,da ich nur mehr über pc hifi mit usb und kopfhörer verstärkung lese,was ich eigentlich nicht will,schon gar nicht streamen.
ich will etwas in die hand nehmen.

würde da ein dac aus dem thread da wandler mit lautstärkeregelung passen,
also nur für die verwendung mit einem cd laufwerk,verbunden mittels digitalkabel?
und die zusatzperipherie einfach nicht verwenden.

danke im voraus
grüsse
karl
Bild
Melomane
Aktiver Hörer
Beiträge: 3142
Registriert: 14.10.2011, 18:30

Beitrag von Melomane »

hallo karl,

vorsicht, der erste Stein:

schau dich mal auf dieser seite um
http://www.hoer-wege.de/
die dort generierten erzeugnisse klingen bei weitem besser als sich die seite liest.

gruß

Jochen
Bild
shakti
Aktiver Händler
Beiträge: 3299
Registriert: 18.01.2010, 16:20
Wohnort: Köln
Kontaktdaten:

Beitrag von shakti »

Hallo Karl,
bei reiner CD Wiedergabe klingen viele der alten WandlerBoliden deutlich besser als die aktuellen DAC's , warum also nicht auf die Erfahrung aus alten Tagen zurueck greifen und sich einen alten und mittlerweile preiswerten DAC Boliden kaufen?

Mark Levinson 380s, DCS Elgar, Wadia 27iX usw, Audio Note 3, Reymo usw sind mittlerweile durchaus zu vernueftigen Preisen zu bekommen.

Wenn es was neues sein soll, waere der Audio GD Master 7 (auch mit "alten" DAC chips) die heisse Empfehlung, zB ueber Magna Hifi in Holland stressfrei zu beziehen,

Netten Gruss
Juergen
Bild
kadu
Aktiver Hörer
Beiträge: 100
Registriert: 13.05.2014, 12:08
Wohnort: bad hall o.ö.

Beitrag von kadu »

hallo juergen,

dass ist wirklich eine gute idee,ich dachte die älteren dac,s können klanglich nicht mehr mithalten.

da begebe ich mich doch gleich auf die suche.

besten dank :cheers:
viele grüsse
karl
Bild
oncle_tom
Aktiver Hörer
Beiträge: 85
Registriert: 17.08.2013, 14:19

Beitrag von oncle_tom »

Noch günstiger als die oben genannten und genau so gut: Parasound DAC-1000, 1100 ...
Die DACs wurden von John Curl entwickelt, Kennern sagt der Name was.

Grüße
Peter
llucki
Aktiver Hörer
Beiträge: 693
Registriert: 27.09.2013, 14:01
Wohnort: Köln

Beitrag von llucki »

Melomane hat geschrieben:schau dich mal auf dieser seite um
http://www.hoer-wege.de/
Hallo Karl,

daran hatte ich auch zuerst gedacht. Ein CD-Transport CEC TL-3N inkl. hoer-wege Modifikation für ca. 3.400,- € in Kombination mit dem hoer-wege DAC-UP-PCM1794 MK-II inkl. Lautstärkereglung für ca. 3.000,- €, (und ein adäquates Digitalkabel und einige Tage Einspielzeit), bringt einen in direkten Kontakt mit dem Inhalt der CDs.

http://www.hoer-wege.de/cd_tl3n.htm
http://www.hoer-wege.de/dac1794mk2.htm

Bevor eine Entscheidung fällt, würde ich mir das auf jeden Fall mal anhören. Ich habe diese Kombi dort mal gehört und bin seitdem treuer Kunde.

Viele Grüße
Ludger
Bild
Hans-Martin
Aktiver Hörer
Beiträge: 9156
Registriert: 14.06.2009, 15:45

Beitrag von Hans-Martin »

Hallo Karl
Spontan fiel mir ein, dass ein Sony CD-P777 eine ausgezeichnete Ausgangsstufe am RCA Ausgang hat, der aber nicht regelbar ist, weil das Poti dafür parallel zu deren Eingang den regelbaren Audioausgang mit simplem OP amp ansteuert. Es ist kein großer Aufwand, das Gerät für diese Zwecke (Regelmöglichkeit, Ansteuerung Kopfhörer von dieser diskret aufgebauten Ausgangsstufe) umzubauen.
Es gibt bei einem CD-Player mit integriertem DAC normalerweise keine Clocksynchronisationsprobleme, höchstens einen Bedarf für eine noch bessere Clock.
Swoboda Tuning gab es auch für dieses Modell und erreichte eine gewisse Berühmtheit.

Wenn Kopfhörer eingesetzt werden, sieht/hört man Klangeigenschaften etwas anders als mit Lautsprechern.
Ich denke, dass dies einen zentralen Punkt bei einer Entscheidung darstellt.
Bei Kopfhörern macht sich mMn ein Crossfeed positiv, bei Frequenzen unter 1kHz wird die Kanaltrennung herabgesetzt, eigentlich das Gegenteil von FLOW für Lautsprecher. Eine solche Einrichtung ist prinzipiell recht simpel, den Effekt halte ich für wichtiger als einen externen DAC, von dem man sich einen Vorteil verspricht.

@Uli, das wär doch mal was, FLOW für Kopfhörerbetrieb umzustricken...
Grüße Hans-Martin
Bild
kadu
Aktiver Hörer
Beiträge: 100
Registriert: 13.05.2014, 12:08
Wohnort: bad hall o.ö.

Beitrag von kadu »

hallo beisammen,
ersteinmal besten dank für die anregungen :D

diese 2 dacs würden mich auch extrem reizen....

viele grüsse
karl


http://gd3.alicdn.com/imgextra/i3/12580 ... 808208.jpg
http://gd2.alicdn.com/imgextra/i2/12580 ... 808208.jpg
http://gd4.alicdn.com/imgextra/i4/12580 ... 808208.jpg
http://gd3.alicdn.com/imgextra/i3/12580 ... 808208.jpg

Which lasted two years, GUSTARD DAC-X20U finally ready to market.

2 x ESS Technology ES9018 Sabre Reference 32bit

XMOS 32bit/500MIPS

Two-year warranty


Adopt more humane modular XMOS USB daughter card.

Analog circuit use High-end discrete lines.

Features:
1. Doul ESS Technology Sabre Reference 32bit ES9018 DAC chip,R and L sound Chanel one on each side。

2.Automatic adaptation master clock technology and Asynchronous master clock technology。
Two clock mode can be freely selected.

3. XMOS 32bit USB receiver chip which is best performance asynchronous USB audio solution.

4.CPLD programmable logic device. Soft control ES9018.

5. Three files gain, volume can be adjusted. Attenuation adjustable from 0 to -99DB.

6. TFT LCD screen, adjustable contrast.

7. Power supply with two O-type transformers, Digital and Analog independent power supply, and use Discrete Components regulation Voltage stabilization.

8. Full balance Discrete components Analog Line. Balance / RCA output simultaneously.

9. Digital Input: balanced Spdif AES/EBU port, RCA, Toslink Optical input and USB,(Key switch)

10. Both 110/120v and 220/240v version supported.

11.Power Supply: AC 230V 50 / 60Hz (AC 115V 50 / 60Hz),Power Consumption: <50W

12.Dimensions (excluding protruding part): W 380MM * H 65MM * D 260MM

DAC Specification:

ESS Technology ES9018 Sabre Reference 32-bit DAC
8 mono to 2 stereo configuration,four D/A converters per channel

Digital Input:


Coaxial、BNC:

PCM:16-24bit /44.1、48、88.2、96、176.4、192 kHz

DOP:DOP64

optical:

PCM:16-24bit /44.1、48、88.2、96、176.4、192 kHz

DOP:DOP64


AES/EBU:

PCM:16-24bit /44.1、48、88.2、96、176.4、192 kHz

DOP:DOP64



IIS:

PCM:16-32bit /44.1、48、88.2、96、176.4、192、352.8、384kHz

DSD:DSD64、DSD128、DSD256、DSD512

DOP:DOP64、DOP128 DOP256、DOP512



USB: 16-32bit / 44.1、48、88.2、96、176.4、192、352.8、384 kHz


DSDx64(2.8224MHz)、DSDx128(5.6448MHz)






Analog Output:

RCA Output :2.3 Vrms @0dBFS
XLR Output :4.6 Vrms @0dBFS
Frequency :20-20K Hz +/-0.15dB

DSD plug-in Download:

http://sourceforge.net/projects/sacddec ... rce=navbar

Windows XP/Vista/7/8 Driver:

http://pan.baidu.com/s/1ntDUtqp

Mac OS X 10.6.4 and above don't need to install the driver.




USB 2.0 interface can replay 1BIT/2.8224MHz or asynchronous sampling rate 5.6448MHz DSD Digital Signals.

This is supported DSD64 and DSD128.

Coaxial / Optic / AES / EBU support DOP64, can connect Digital Music Player playback SACD MUSIC

Main chip: ESS Technology ES9018 Sabre Reference 32bit chip x 2

Unlike conventional Sigma-Delta D / A converter, ESS Sabre32 use innovative patented circuit,
Get rid of the ordinary Digital Audio System timebase jitter, get very wide dynamic range, low distortion and accurate sound field。


Automatic adaptation master clock technology and Asynchronous master clock technology。
Two clock mode can be freely selected.
CPLD Digital Integer technology

Full balance Discrete components Analog Line. Balance / RCA output simultaneously.


Two 50W O-type transformers. The best choice for high-end equipment.

Coupled better and more efficient. A more stable job, to bring you more beautiful sound.





XOMS USB Professional SOUND CARD:
XMOS X-CORE digital signal processing unit, which have powerful processing capabilities, is by far the most advanced digital audio solution
USB Audio Class 2.0 implements asynchronous transfer playback, and supports low latency ASIO, KS and other professional audio software interface, support for Windows and Mac operating systems.

oder das teil

L.K.S Audio MH-DA003 ES9018 * 2-Dual-Kanal-Decoder Amanero USB DAC DSD Crystek Femto

http://www.shenzhenaudio.com/media/wysi ... 003-10.jpg
http://www.shenzhenaudio.com/media/wysi ... 406668.jpg
http://www.shenzhenaudio.com/media/wysi ... A003-8.jpg
http://www.shenzhenaudio.com/media/wysi ... A003-7.jpg
http://www.shenzhenaudio.com/media/wysi ... A003-6.jpg
http://www.shenzhenaudio.com/media/wysi ... A003-4.jpg

We're planning a full-page layout of the circuit board, so that the layout of the circuit is more reasonable and simple. The effects of several key points to adjust the sound of the material:

1. AC power input socket using Furukawa's FI-03 gold-plated power seat insured and equipped with specially designed for HiFi Audio silver fuse.

2. Use two oxygen-free copper wire wound 50VA toroidal transformer, the transformer lead all use a square silver-plated oxygen-free copper wire heart signal line.

3. AC transformer input rectifier diodes using Philips BYW29 series of ultra-high-speed diodes.

4. The primary filter uses a large capacitor capacitance nichicon top of KG, other parts of the capacitor using nichicon FG FM system with panasonic top class match.

5. The use of Class A discrete analog portion of supply Toshiba sound supervisor C2240 / A1930 composition.

6. Low voltage, digital, analog circuit using LT317 and LT1763 regulator ultra low noise, and each functional component has independent regulator supply.

7. Using excellent results in ultra-low jitter (US Crystek 82fs) to fly second supply ES9018, you can get excellent background Quietness and better sound cohesion. (On the fly seconds, Hong Kong consumers have changed quite a lot of friction, we also have a lot of old users on the MH-DA002 changed Mogadishu seconds into the flight module)

8. The use of ultra-low contact resistance Fujitsu Takamizawa signal relay as a mute switch.

9. Audio output using Cardas rhodium-plated RCA Master Card Holders, rhodium-plated RCA Block strong antioxidant and can significantly improve the degree of wear-jack, so RCA connectors timeless, long-term use will not cause audio port is bad deterioration in sound quality.

10. The machine is designed remote control, with our specially designed remote control, users can be more convenient control decoder, boot, standby, etc. All functions can be done by remote control. Each button on the remote control, respectively, a feature greatly simplifies the handling difficult.

11. The use of the large size of VFD vacuum fluorescent display. Fonts greater clarity, long-distance remote control is also easy to identify.

12. The details of flowers to every part of the machine screw selection. We chose imported nickel-plated screw, high precision, beautiful appearance, and can be long-lasting antioxidant, preventing the cover screws rust affect the appearance.





About Chassis:
We further strengthened the details of the deal chassis. MH-DA003 chassis with a high-specification aluminum precision CNC machine engraving on. Molding thickness of the front panel is 18 mm, the rear plate 8 mm, left and right side plates 10 mm, upper and lower cover are 4 mm. Chassis is very solid and very high accuracy. Character surface using laser engraving.

This machine uses the current top Italian Amanero USB module in USB access mode supports PCM and DSD decoding, PCM supports 44.1K ~ 384K various bit rates, DSD support DSD64, DSD128, DSD256, DSD512 (Windows).

Supports 32/64 bit Windows systems XP / Vista / win7 / win8, you need to install proprietary drivers (supports KS / Wasapi / WDM / ASIO).

Mac OS 10.6+ and Linux UAC2 without driver.


Amanero USB DSD drive and use the setup method Download (please copy the following address into your browser to open)

http://www.mu-sound.com/drivers.html







General Specifications:

1. ES9018 dual-channel decoder in parallel, using a total of two ES9018, ES9018 operates in mono so that the left and right mono mode, respectively, the benefits of the single ES9018 machines than double the output current can enhance the sound more solid details better, higher Naiting degrees.

2. Multiple independent power supply, power supply left and right channels, respectively, each part of the supply carry out their duties effectively improve the power supply interference problems of different functional blocks. The analog output section using a specially designed all-discrete parallel power (150mAX2 full discrete Class A parallel power circuit, the current source + amplifier + Wallman mirror circuit Billiton frequency), a huge contribution to the sound, the sound of the whole tri-band equalization, low frequency dive depth, the thickness of the intermediate frequency, high frequency and delicate texture than ordinary linear regulated power supply has improved so much.

3. Built-Italian Amanero USB module that supports SACD playback, which is the current network HD playback of music resources is a very strong weapon. USB module plus isolation chip, can be isolated from the impact after inserting the USB computer to decode the overall signal to noise ratio.

4. Support USB, I2S / DSD single-ended signal (RJ45), I2S / DSD balanced signal (HDMI), Coaxial, BNC, AES / EBU balanced, a total of seven-way fiber source input, the current input port so rarely seen a complete decoder.

5. The analog audio output port includes standard RCA single-ended outputs and XLR balanced outputs each one right.

6. display with VFD display, with Mitsubishi high transmittance display bezel, close fitting, display abnormal outstanding.

7. The use of physical buttons, a return to a more convenient mode of operation.
8. Support 0dB ~ -127dB digital volume control, 0.5dB one, a very fine adjustment. Also has a key to skip the remote to adjust the volume function.

9. Support 5 kinds of digital filter mode setting. Fast, Slow, 50K, 60K, 70K. You can choose, under different filter modes, the attenuation characteristics of the digital filter are different, will slightly affect the sense of hearing, please select your favorite mode of self to use.

10. Support to set the machine to work in mono mode, you can choose to work in the left channel or right channel, and you can specify the output terminal for L terminal or R terminals. Shao convenient divisions using two machines one channel. When single normal use, select Stero stereo output mode.

11. Supports decoding internal digital phase locked loop bandwidth settings. Recommended defaults to Auto automatically selects the mode.

12. Support Deemphasis de-emphasis on or off. Select the de-emphasis when opened, the decoder will be automatically recognized by the spdif input audio signal flag is made of pre-emphasis, and automatic sample rate corresponding de-emphasis.

13. The display has four adjustable brightness. Be adjusted by remote control.
14. The remote boot, standby function.

15. In most settings with memory function, off automatically to save settings and restore the state with the next startup when the last shutdown.


The dynamic range:> 123dB
Distortion: <0.0003%
The stereo separation> 110dB
RCA unbalanced port output amplitude 2Vrms, XLR balanced port output amplitude 5Vrms.
Machine size: 440 * 320 * 90mm
Machine weight: 8.1kg


Internal circuit design of the machine, we followed the two previous critically acclaimed parallel ES9018 decoding design ideas.

Good decoder, power must be designed to focus, so we have adopted a multi-channel power supply, 9018 cores, digital, analog, I / V converters & LPF, the control section, display and other features has a separate power supply chip power, reducing interference between the various functional blocks, and strive to do the best sound. Machine strict accordance with the digital, analog, and split single-point ground handling.

The analog output section, using the TI / BB precision audio op amp OPA1612, op amp seat belt can be replaced (dual op amp, if you need to replace the op amp friction machine, be sure to pay attention to dual op amp, if you want with a single op amp, be sure to add a single op amp's two dual op amp transfer switch a converter board). OPA1612 op amp full of flavor, the sound fidelity is also very good.

The analog output section mute switch relay with extinction POP sound and prevent the switch when decoding for post-amp DC shock. (Good habits is the first to open the boot decoding, and then open amp; amp off the first turn, then off decoding).
Bild
gregor
Aktiver Hörer
Beiträge: 669
Registriert: 08.03.2010, 20:08

Beitrag von gregor »

Hallo Karl,

mir leuchtet nicht so recht ein, weshalb Du aktuelle Wandler mit Sabre Chips für die angepeilte Verwendung so reizvoll findest. Beide von Dir genannten Geräte sind DSD-fähig und bei beiden dürfte die USB-Anbindung bei der Entwicklung ein Schwerpunkt gewesen sein. Da geht dann auch bei bei gutem P/L-Verhältnis viel Geld für Dinge drauf, die Du gar nicht brauchst.
Dir ging es doch um REDBOOK, folglich würde ich mich, wie schon von Jürgen vorgeschlagen, eher bei den nicht mehr ganz aktuellen Boliden auf dem Gebrauchtmarkt umsehen. Gutes Netzteil, gute Ausgangsstufen und konforme AES/SPDIF-Anbindung wären meine Prioritäten, dann erst würde ich nach den Wandlerchips sehen (jedenfalls in der Preisregion der zuletzt von Dir genannten Wandler).
shakti hat geschrieben:Wenn es was neues sein soll, waere der Audio GD Master 7 (auch mit "alten" DAC chips) die heisse Empfehlung, zB ueber Magna Hifi in Holland stressfrei zu beziehen,
Auch da würde ich Jürgen zustimmen.

Beste Grüße
gregor

P. S. Mit verschiedenen Gustard-Geräten habe ich bereits sehr positive Erfahrungen machen können, fast immer Preisbrecher bei der Audio-Qualität in etwas rustikalen Gehäusen.
Bild
kadu
Aktiver Hörer
Beiträge: 100
Registriert: 13.05.2014, 12:08
Wohnort: bad hall o.ö.

Beitrag von kadu »

hallo gregor,

ich weiss,dass meiste brauch ich gar nicht,aber das preis -leistungsverhältnis glaube ich, ist grandios.

ich bin kein techniker,aber das platinenlayout der beiden geräte fasziniert mich einfach,einfach schön anzusehen.

auch habe ich in beiträgen in head-fi.org nach einigen suchen gelesen,dass der lks extrem hochauflösend sein soll.
vom gustard x20 gibt es noch nichts zur zeit.

ob dann die extreme analytik mit meinen kh 420 kompatibel wäre,ist eine andere geschichte.

aber ich bin gerne einer der blind kauft und versucht mit den geräten zusammenzuwachsen.

beste grüsse
karl
Bild
shakti
Aktiver Händler
Beiträge: 3299
Registriert: 18.01.2010, 16:20
Wohnort: Köln
Kontaktdaten:

Beitrag von shakti »

ich habe den ESS Sabre 9018 Dac noch in keiner mich befriedigenden Red Book Applikation gehoert, klang bis jetzt immer hochaufloesend / fleischlos....
Es gibt einige Anwendungen in denen der Sabre Dac auf High End gesounded wurde, dann klingts nach Weichspueler..., im Hochbit Bereich sieht das anders aus, da mag das passen.

Verstehe, dass die Bilder nett anzuschauen sind, dennoch sehe ich den Sabre Chip bei CD Digital Futter nicht als beste Wahl an.

Netten Gruss

Juergen
Bild
audiokarl
Aktiver Hörer
Beiträge: 81
Registriert: 02.04.2013, 15:12
Wohnort: augsburg

Beitrag von audiokarl »

Hi Karl,

vielleicht bekommt man, da es ja ein Upgrade auf DSD (K-01x), das aber m. M. niemand eigentlich braucht, einen gebrauchten Esoteric K-01.
Das ist ein top Laufwerk incl. einen der besten DAC im Highend-segment.
Aus eigener Erfahrung sage ich, dass gerade bei Redbook Daten der ESOTERIC hörenswert ist.

Gruß
Karl
Bild
Fujak
Moderator
Beiträge: 5752
Registriert: 05.05.2009, 21:00
Wohnort: Bayern
Kontaktdaten:

Beitrag von Fujak »

Hallo Jürgen, hallo Karl,
shakti hat geschrieben:ich habe den ESS Sabre 9018 Dac noch in keiner mich befriedigenden Red Book Applikation gehoert, klang bis jetzt immer hochaufloesend / fleischlos....
Volle Zustimmung. Und wenn ich ergänzen darf: ... immer auch ein bißchen körnig.

Grüße
Fujak
Bild
Antworten